Page 82 - OP_Katalog_EN

OPP-SENS® Multisensor / Multicontroller

Our new multicontroller combines three innovative product
features in one device: We combine a multisensor with a controller
function to enable intuitive parameterization via a smartphone
without the need for power or physical contact. The multisensor
and multicontroller are available in 40 variants to meet your unique
requirements. The multisensor measures three variables as standard:
temperature, relative humidity, and CO 2 . VOC is also available as an
option. These measurements are transmitted via three 1-10 volt out-
puts. You can read or write all the values using the Modbus variant.
The multicontroller sits on top of the multisensor and rounds out
the multisensor’s already diverse range of variants by providing a
controller function which can be assigned to a measured value. In
addition, an NFC display is available to further expand the extensive
NFC functionality. It enables all of the parameters output by the
sensor to be read in and written via a smartphone app without the
need for power or physical contact. The app can be used to create
documentation covering all the values configured in the sensor
as well as the individual designation. The corresponding app is
available in the App Store for Apple devices and the android version
is available in the Google Playstore. Furthermore, you also have the
option of either utilizing 2 analog inputs to read in the flap setting
position, for example, or to implement a relay output for a switching
function. The switching threshold can be configured directly via the
app or Modbus.

Previously: The new approach:

0
0
1
1
0 1 1 1 0

0 1 0
We take a new approach with the multicontroller, integrating the
controller function into the sensor.
This eliminates the need to route the cable via the control system
and enables the multicontroller to transmit the control signal
directly to the flap.
This diagram illustrates the conventional CO 2 control process.
A CO 2 sensor supplies the measurement data to a higher-level This solution alone can save up to 60% of required cabling. In
control system, which in turn transmits the control signal to the addition, the multicontroller also analyzes the position indicator
continuous drive on a ventilation flap. of the flaps via the analog inputs.

OPP-SENS® Multicontroller Keynote

82 | Catalog 2024 | Sensors For our current prices see www.oppermann-regelgeraete.de/en/downloads/catalogue-1